High Pressure Split Sleeve Repair Clamps for Oil and Gas Lines

Basic Info.

Model NO.	GW50
Packing	Plywood Case
Rubber Material	Buna-N Packing, Viton, Silicone and etc
Standard Working Pressure	1000 Psi
Transport Package	Wooden Box
Specification	1.5′′ to 42′′
Trademark	GREAT WALL
Origin	China

Packaging & Delivery

Package Size 60.00cm * 60.00cm * 60.00cm Package Gross Weight 60.000kg

Product Description

Split Sleeves Repair Clamps
Bolt-On Split Sleeves Repair Clamps are repair fitting that can be used to seal oil or gas lines leaks caused by corrosion or damage on onshore and subsea .
They are suit for oil and gas lines with the operation pressure up to 3000 psi .
Those are easy and safe to install, bolt-on fittings that stop the leak once the fitting is properly installed .
The fittings are not welded to the pipeline and it can be removed or replaced .
Bolt-On Split Sleeves come in numerous configurations, including Elbow, Tee and Cross.
All custom designed to repair curved pipeline section and pipeline joints .

Dimension Sheet
S/N	Pipe Dia	Size (A)	Length (D)	Size (F)	Total Length (C)	Working Pressure	Hinge	Lifting Ring
	mm	mm	mm	mm	mm	bar
1	38	73	30	6	200	140	No	Yes
2	50	79	30	6	200	140	No	Yes
3	63	85	30	6	200	140	No	Yes
4	76	101	30	6	200	140	No	Yes
5	101	127	30	10	200	140	No	Yes
6	152	180	30	10	300	140	No	Yes
7	203	231	30	10	300	140	No	Yes
8	254	285	30	10	300	140	Yes	Yes
9	304	336	30	10	300	100	Yes	Yes
10	355	368	30	10	300	100	Yes	Yes
11	406	419	30	10	300	100	Yes	Yes
12	457	469	30	10	350	100	Yes	Yes
13	508	520	30	10	350	64	Yes	Yes
14	558	571	30	10	350	64	Yes	Yes
15	609	622	45	10	350	64	Yes	Yes
16	660	673	45	10	350	64	Yes	Yes
17	711	723	45	10	350	64	Yes	Yes
18	762	774	45	10	350	64	Yes	Yes
19	812	825	45	10	350	64	Yes	Yes

Pressure Test :
We carry 100% water pressure pressure test to each piece of Split Sleeve Repair Clamps before delivery

Project Cases :